Practical guide: reconditioning and recovery of furniture

Even if you have a newly renewed house, it is difficult to give up the old furniture, to which you have attacked and can be connected pleasant memories.

You don’t want to break with some old furniture, but don’t you know how to integrate them into the new decoration? Do you think the old furniture will be put in bad light by newly assembled new objects? Nothing more false. The combination between the old and the new is uniform, provided that the old furniture are in a presentable state.

If your old furniture, however, have stopped its shine, you shouldn’t panic. There are ways in which it can be brought back to life. Find out in this material that are the simplest reconditioning tricks, but also the difference between reconditioning and restoration.

Because it is useful to recondition the furniture

There are three reasons why you should master some simple tricks for the reconditioning of furniture. First of all, in this way you will keep those old furniture that have sentimental value or personality and do not want to give up.

So, you will be able to maintain sets of furniture you have attached. For example, the table and chairs inherited from the grandmother will not reach the garbage just because one of the feet of the chairs broke.

Last but not least, you will be able to bring precious furniture. For this, however, a restoration will be necessary, that only specialists can do, with the help of special techniques.

What does furniture of furniture means. Refurbishment vs. restoration

If the old furniture you own have a sentimental value and want to be in use, a simple reconditioning is sufficient. This process provides for the application of repair and restoration methods in working conditions. It doesn’t matter how and with what materials the final result is obtained. The only purpose is that the furniture is functional again.

The restoration, on the other hand, implies the restoration, the reconstruction of the old furniture that respect the initial form and the original style. It applies to precious objects, sometimes considered true works of art.

The restoration is made by craftsmen or by companies specialized in these works. They will respect the design and initial aspect of the furniture. The repair of the parties will be performed with the help of the materials that have been initially used for the construction of the furniture and will not be replaced with some modern, even if the latter can be more resistant. The style and the period in which the furniture was made must be identified. Only in this way, the swimming pools will continue to be exponents of the past.

Read also: golden rules in the arrangement of the study

A restaurateur has knowledge of the history of art and old master work techniques, demonstrated by the certificates on the field.

Restore old furniture, its value will increase. This is the reason why restoration services are not exactly cheap.

Built -in video:

https://www.youtube.com/watch?v=kjavdy7sjgy

Refurbishment of upholstery

Reupholstery

If you have furniture that is dear to you, but who have the destroyed coating, not in a hurry to go with them to the helmet. You have the available conservation method, but you will have to resort to a specialist.

Built -in video:

https://www.youtube.com/watch?v=wr6kyot6v1m

For the furniture held to integrate into the contemporary design of the house, they buy modern materials, in colors similar to those already existing in your home or in contrasting colors, but which will adapt to the furnishings.

Which furniture can be merged

They can be retained by sofas and armchairs, on chairs or beds. And the beds in line can be kept and reintroduced in use, if desired.

Built -in video:

https://www.youtube.com/watch?v=FNQDJ76G60I

Refurbishment of wooden furniture or wooden parts

Evaluation of wooden furniture

The documentation is the first step you need to take when you want to set the value of the old furniture. Only in this way can you determine whether the furniture requires restoration or just a simple reconditioning. You can call it on the advice of specialists.

Then take some photos and go to the headquarters of a company specialized in the restorations. The first sign indicating that a piece of furniture is old and potentially precious are irregularities in the consistency or color of the wood.

Reconstruction of some wooden parts – feet, handles, drawers

If we talk about a simple reconditioning and you have little skills, missing pieces like drawers or feet can be made of you.

For the missing handles you can try the antique shops, where you could find, with a little luck, some. Most likely, however, you will need a new set of handles or some facts to order, according to the existing model.

Built -in video:

https://www.youtube.com/watch?v=vxbuhyqvbk4

Wood cleaning. Homemade cleaning solutions

The first step for furniture re -seal is the preparation of the surface. With a soft cloth, dry the powder from the furniture. Then soften the cloth in alcohol, to remove any trace of impurities or other substances that could be on the surface of the furniture. This phase will also highlight the defects you need to repair.

Instead of alcohol, you can also use a solution made with 3 liters of hot water, 2 tablespoons of terrible (the substance is flammable, then take precautionary measures) and 2 tablespoons of linen oil. It will give a final effect of the furniture.

Equally effective is a solution made with 80% water and 20% of ammonia. Depending on the type of wood, the ammonia can close or open the wood.

However, there are also specially designed solutions for cleaning furniture, which you find in the trade.

Built -in video:

https://www.youtube.com/watch?v=ruezj14qegw

Grinding to remove scratches

If the furniture is very scratched and you want to apply a new lake or paint it, you will have to grind it after cleaning. For this you will need a pulpit. A more abrasive one guarantees a deep grinding, a finest one, will create a more fluid surface.

If the paint layer or the old lake give up the curtain, you can use a solvent before continuing with grinding. You can find it in special stores.

The furniture can present bumps, deep scratches or even visible holes after grinding. To solve these problems, use the primer before applying the new layer of lake or paint.

After grinding, the furniture must be clean again.

Built -in video:

https://www.youtube.com/watch?v=830ich7yy0

Lidination

After grounding and cleaning, it’s time for the application of the new lake layer. Choose one of quality, which will last well over time. The complete dry lake is cleaned with lemon oil. This process will increase its shine.

Because the lake reaches the entire work surface, in a uniform layer, you can use a special lake pistol.

Built -in video:

https://www.youtube.com/watch?v=98could3mrk

dyeing

You can paint chairs, stools, comfortable, tables, beds, wardrobes, offices and the list can continue. Any furniture, even the kitchen, can be brought back to life using this technique.

And before painting, the parts must be clean and polished. Choose a cleaning and dirt resistant paint, but at the same time protect the wood. The classic ones, based on oil or side -based ones, resist very well. If necessary, you can give more layers of paint.

Beware of dust, soft insects or leaves that can be deposited on a surface just painted or lacquered.

Built -in video:

https://www.youtube.com/watch?v=acazur66zze

Ride Vecchi Old Wooden Furniture

Cuts legging

Special designed to create a chic shabby or one inspired by the Provence region in France, the cutting or napkin technique, as they say, is easy to apply and can renew all the furniture, with a minimum investment.

It implies the application of pieces of paper, napkins, skin or fabric on furniture and covering them with stickers and special lakes.

Built -in video:

https://www.youtube.com/watch?v=rjyjei0kyu

Dress in pieces of wallpaper

Another simple reconditioning technique of the old furniture involves its dressing in the decorative wallpaper. In this way you can save bed tables and shelves, comfort, wardrobes or even condiment and internal doors.

Built -in video:

https://www.youtube.com/watch?v=wbetjxdqu_o

Crushing

If you want to save old furniture, but the background seems too large, you can use decorative sticker. You can find it in a variety of colors and motifs, for all tastes, and it is very easy to apply.

Built -in video:

https://www.youtube.com/watch?v=2eg_oqykg6g

Rugina, the main enemy of metal furniture

When we talk about metal, corrosion is the main problem that arises over time. Although the metal has been treated with anti -rug solutions and has a low carbon content, oxidation is a natural process. It can be slowed down, but not completely stopped.

Therefore, any process of reconditioning the old parts of the metal furniture must start by cleaning the rusty areas and withdrawing them. So the affected parts are corrected and the elements are blocked, if necessary. The reconditioning process ends with the finishing of the parts.

Metal furniture can be painted, gold or simply polishing, for an ultra -moderno and industrial design.

Built -in video:

https://www.youtube.com/watch?v=dbrchvm5xpy0

Metal furniture cleaning techniques and repainting

To refurbish the metal furniture you need space, a metal brush and one of the hair, an anti -rugal treatment, an emerald and anti -sust paint.

The furniture is cleaned from rust with space, then with the metal brush. In the end he is grinding with Emelel, until the surface remains smooth. Clean the surface with the hair brush and apply the anti -wrinkle treatment with the help of a toothbrush. Follow the paint, necessarily in two layers.

Replacement of accessories

We include the springs, plants or furniture handles in this category. These can be purchased from FAI -Da -te stores. For a unique and vintage design, you can also buy them from antiques or seniority fairs.

Read also: ingenious ideas to organize a friendly room

Tools needed to refurbish the old furniture

For the reconditioning of old furniture, you can need:

• Smirghel;

• Tituire cutting;

• metal brush;

• Perie de par;

• thoughts;

• lacquered/painted gun;

• Sumurbelnite;

• Ciocan your metal;

• rubber hammer;

• adhesive tape;

• a toothbrush;

• Aspirator

• Work gloves and face mask.

Do you have furniture that can be reconditioned? Which technique do you think to bring them back to life?

Photo source: ShuttersTock.com